(240) 215-0224

Extek Microsystems Silver Duplicators 3441

Printer Friendly Version

Extek® Model 3441 Silver Film Duplicators

Extek® Model 3441 Silver Film Duplicators
  • Extek Model 3441 utilizes the same compact design and film duplicating technology which has been proven over many years.
  • Designed to produce high quality duplicates from old, curled and damaged masters
  • Works with all types of master films, putting the least possible stress on fragile masters, even with nitrate or acetate backings.
  • Duplicates common quality 16mm or 35mm film at 150 feet per minute.
  • Design simplicity and quality in manufacture account for excellent reliability enjoyed by our users
  • Convenient threading mechanism permits instant, high quality operation.
  • Low maintenance requirements; most common service can be done in a matter of minutes.
  • Digital speed and exposure readout also available

Extek Microsystems

Features

Film Size:

16mm and 35mm

Film Type:

Master: Silver Halide, Diazo or Vesicular
Duplicate: Silver Halide
– Print form (Image reserved)
– Direct Duplicating (Image not reserved)

Film may have sprocket holes; however, sprocket registration is not maintained.

Film Capacity:

  • Maximum roll diameter, 10 inches (25cm); diameter of full roll must not exceed five (5) times the core diameter.

Duplication Speed:

  • 150 (46 meters) per minute, nominal

Exposure Lamp:

  • 250 W tungsten halogen

Resolution:

  • 180line pairs/mm, minimum

Electrical:

  • 100 to 130 VAC (115V nominal), 60Hz, 6 Amps (3441)
  • 200 to 250 VAC (230V nominal), 50Hz, 3 Amps (3441E)

Environmental:

  • Darkroom operation, allowable light level upon type of duplicating film being used.
  • Recommended relative humidity: 65% - 85%

Heat Load:

  • Less than 94- BTU/hr (275W) standby
  • Less than 1710 BTU/hr (500W) when duplicating

Spindle Configuration:

  • 5/16” of 1” spindles, operator changeable

Size:

  • Width- 30.5” (77.5cm)
  • Depth- 21.0” (53.5cm)
  • Height-35.0” (88.9cm)

Weight:

  • 165 lbs. (75kg)
  • Crated for shipping, 225lbs., (116kg)

Optional Features

Digital Readouts:

Red LED readouts for running speed (feet or meters/minute) and lamp voltage shows your duplicating conditions at a glance

Tacky Roller Film Cleaner (Model TR129)

Master Film is cleaned just before duplicating with this environmentally safe attachment. Removes 99% of dust and debris.

Film Rewind:

Switch-operated bi-directional rewind

Work Tables:

Clear mounted and fixed poison, heavy-duty tables are available

Spare Parts Kit:

Level I (basic) and Level II (comprehensive) spare-parts kits keep your unit running and insure against excessive down time

Specifications subject to change without notice

Silver Film Duplicator 3441 Spec Sheet

General inquiries & Suggestions:

Copyright © The Crowley Company, All Rights Reserved.